Although your existing box spring or foundation might work ok, the addition of our all wood foundation will give you peace of mind you are getting something designed for this type of mattress and will stand the test of time.
Easy assembly, for use with existing metal bed frame. Kiln dried spruce for added strength. Slats are 2 3/4" wide and 2 1/2" gap between slats. That's what makes our better than the rest.
Step 1 is connecting the side rails. Lay the side rails and one end beam on the floor. Line-up both side rails with the channels on the end beam. Insert the bolts through the hols on both corners of the end beam and tighten.
Step 2 is placing the center rail through the middle of the end beam. (There are no bolts necessary to secure this rail to the end beam.) Then insert two bolts through the holes found on both outside corners of the end beam and tighten.
Step 3 is positioning the slats. Simply place the roll of slats on the top of the wooden structure at one end. Set the first slat into the pegs on each side and unroll the slats across the top of the foundation. Set the last slat into the other end pegs. Spacer webbing should be up.(Youmay have to pull tight to get the slats snug)
Step 4, the final step, is putting the cover on the foundation. Slip the cover over the corner edges of the foundation with the fabric out. Tuck the excess under or use hand stapler to secure to wood and your done.
This product hasn't received any reviews yet. Be the first to review this product!